Industry
Location:Home > News > Industry
Detection of metal stamping parts
Author:admin Date:2015-04-02 09:13:45 Hits:46 comment:0 tags:

Hardware stamping parts of the hardness testing using the Luo hardness tester. Small, with complex shape stamping parts, can be used to test the plane is very small, can not be detected on the ordinary table.

Stamping parts processing including punching, bending, drawing, forming, finishing and other processes. Stamping processing is the main materials of hot or cold (with cold based) metal strip material, such as carbon steel, alloy steel, spring steel, galvanized plate, tin plate, stainless steel plate, copper and copper alloy plate, aluminum plate and Aluminum Alloy etc..

PHP series portable surface hardness tester is very suitable for testing the hardness of these stamping parts. Alloy stamping parts is the most commonly used in the field of metal processing, machinery manufacturing. Stamping parts processing is to use the mold to make the metal plate with separation or forming processing method. Its application scope is very wide.

Hardness test of stamping materials, its main purpose is to determine the extent of annealing the sheet metal stamping process is suitable for the purchase will be subsequently the stamping process of different types, different requirements of plate hardness level. For the detection of Aluminum Alloy plate stamping processing available webster hardness meter, material thickness is greater than 13mm can use the Barcol hardness meter, pure aluminum or low hardness Aluminum Alloy board should adopt the Barcol hardness meter.

In the stamping industry, such as stamping metal products factory Shenzhen Chong Hing introduced sometimes also called sheet forming, but slightly different. The sheet forming refers to the use of plate, thin walled tube and wood as raw materials for plastic forming method is called sheet forming, the deformation direction of the plate is generally not considered.


Website:http://en.szdesidun.com/xyxw/77.html
Prev:Introduction to the design concept of stamping parts processing technol…
Next:Sheet metal processing used in the material and sheet metal to start ma…

More>>comment

Submit

About | Products | News | Equipment
Tel:0512-57801659
Copyright © Suzhou Desidun precision metal products Co., Ltd. All Rights Reserved RSS Map
ICP:苏ICP备11045088号